One of the final steps is adding trim to the shed. It is kind of a picky step and I can do it by myself. The plans call for using siding ripped into narrow strips. This is kind of a clever use of siding since the siding comes pre-primed. Normal wood will usually start to flake paint after a couple years so hopefully this will be a more permanent solution.
I started by adding the trim onto the bottom side of the eve boards. That closed them up nicely. Next I added the corner trim on all four corners. Once that was done I was able to add the trim on the face of the siding, under the eve boards.
I recorded a time lapse video of the whole process but the GoPro Auto Upload process would not upload it. So I just grabbed some representative pictures.
