Outfeed Assembly Table
This post deals with an Outfeed Assembly Table I built. This dual purpose table turned out to be very useful.

This post deals with an Outfeed Assembly Table I built. This dual purpose table turned out to be very useful.

This post deals with a Fall Prairie Mowing project that I did for a friend. His CRP had to be mowed or burned so I helped out.

Come along on a 2022 Fall Fishing Trip to northern Minnesota.

This post is about an air intake cover that I made during the deck rebuild. During an energy audit we discovered that the fresh air intake into the Utility room…

A quick post on a recent Retaining Wall Landscaping project. Just a simple rock filled bed, to make mowing easier.

As the deck rebuild winds down there are a few final tasks, such as the landscaping, to be completed. 7/29 – Totally redid the bed on the north side. This…

With the construction phase done, the next step is staining. I use a clear stain because in subsequent years all I need to do is pressure wash it and apply…

7/14 – The stairs on the East side will be in a new location. While we have lots of ideas about what we want to do on the ground where…

7/09 – One day push to start the railing installation. Got everything done except the drink rails. Each of the black aluminum balusters had to be cut to length. I…

The decking is finished except for some fine tuning which will be done later. The next step is to install the skirting about the base of the deck. 7/02 –…